Fonctionnalités et Avantages

• Provides simple, safe and efficient device power over Ethernet
  
• 1/6 power and data ports
  
• IEEE 802.3af compliant

Présentation

The Digi EasyPower provides one or six data/Ethernet ports for connecting powered Ethernet devices to the corporate hub/switch. The Digi EasyPower has two ports for each device. One port provides power and can transmit/receive data to the powered Ethernet device. The second port connects to the corporate hub/switch for Ethernet connectivity.

The Digi EasyPower makes powering device servers easy and cost-effective. There is no need to provide separate power supplies for the Digi One IAP, PortServer TS P MEI family and Digi Connect 50. The Digi EasyPower is fully compatible with the IEEE 802.3af standard. This means that if you have other products that work with IEEE 802.3af standard, the Digi EasyPower can provide power to them as well.

Plus d'information

Interfaces

1/6 female RJ-45 data ports

• Shielded jacks for Category 5 UTP (two pair wire) or 100-ohm STP (two pair wire)
• Distance: 100 meters

1/6 female RJ-45 data+power on Ethernet ports (power over Ethernet)
Environmental

Operating temperature: 0° C to 40° C (32° F to 105° F)
Storage temperature: -10° C to 60° C (14° F to 140° F)
Relative humidity: 10% to 90% non-condensing
Operating altitude: -1,000 to 10,000 feet


Power Requirements

AC power input

•  Voltage: 100-240V autoranging (50 Hz - 60 Hz)
• Connector: 3-pin with ground
• Chassis grounding: yes
• Power supply: one standard, optional dual load-sharing

DC port power output

• Power enabling: IEEE 802.3af
•  Power pins: unused pairs, pins 4,5 (+), 7, 8(-)
• Max. power/port: 20W (42V *0.35A max.)
• Max. power - all ports active: 20*20W = 400W
• Port-to-port isolation: 1000V RMS
• Overload protection: if current reaches 350 mA to 500 mA for greater than 100 milliseconds