Fonctionnalités et Avantages

• Extends RS-422/485 transmission distance up to 40 KM with Single mode fiber
  
• Detachable Wall and DIN-Rail mounting kit design
  
• Plug-in screw terminal block for easy RS-422/485 wiring
  
• RS-485 supports Auto RTS Signal Control (ARSCTM) technology
  
• RS-422/485 Auto Identify and Switch technology make Jumper-free
  
• Supports baud rate up to 460 Kbps
  
• Redundant power 12~48V terminal block & DC Jack input
  
• 15KV ESD surge protection for all serial signals
  
• Optional 2.5KV optical isolation and 600W surge protection

Présentation

SUNIX FTD1218 converter provides interface exchange between RS-422/485 to fiber optic and vice-versa. Fiber media can provides stable data communication and also extends communication distance up to 40KM with single mode fiber and 2KM with multi mode fiber. As well, Fiber transmission is immune to electrical and magnetic interference, secure, and reliable.

SUNIX FTD1218 converter is designed with our unique RS-422/485 Auto Identify and Switch technology and auto baud rate detection, which enable user to switch communication mode or change connected devices without interruption of service. Furthermore, FTD1218 provides dual power input for redundant power capability to ensure non-stop operation.

Plus d'information

Serial Communication

Connector	RS-422/485: Terminal Block
Signal	RS-422 : Tx+, Tx-, Rx+, Rx-  RS-485 : Data+, Data-
RS-422 / 485	RS-422/485 Auto Identify & Switch
Network	RS-422 up to 10 nodes, 1.2KM  RS-485 up to 32 nodes, 1.2KM
RS-485	Auto RTS Signal Control: ARSCTM
Baud Rate	RS-422 up to 115.2 Kbps  RS-485 up to 460.8 Kbps
Protection	Standard:  15KV ESD Surge Protection for all signal  Optional:  2.5KV Isolation Protection for all signal  600W Surge Protection for all signal  *Maximum clamping voltage 24.4 V  *Peak pulse current 24.6 A

Fiber Communication

Connector	SC Type
Baud Rate	Up to 460.8 Kbps
Signal	Fiber : Rx, Tx
Distance	Single mode Fiber up to 40 KM
Cable	Single mode Fiber 8.3/125, 8.7/125, or 10/125 µ
Wave length	Single mode Fiber 1310nm
TxD output	Single mode Fiber -3 ~ +2 dbm
RxD output	Single mode Fiber -5 dbm (Minimum)
Sensitivity	Single mode Fiber -35 dbm

Power

Power Input	12~48 VDC External Power, Terminal Block &  DC Jack type (Redundant Power Input)
Protection	Reverse Power Protection  (Protects against V+ & V- reverse)
Power Consumption	< 2.4W=12V x 200mA

LED

LED	Power, RxD for Fiber,TxD for Fiber, Fiber Status

Operation Environment

Operating  Temperature	0 ~ 60 °C
Humidity	5 ~ 95% RH
Storage Temperature	-20 ~ 85 °C

Regulatory Approvals

Regulatory Approvals

FCC CE

Mechanical

Dimensions	189 x 106 x 40 mm (with Mounting Kit)
(WxDxH)	165 x 106 x 32mm
Case	Metallic Casing & Hard Plastic
Weight	250 ± 5 g
Approvals	CE, FCC(Class B)

Available Model

FTD1218	Single-mode RS-422/485 to Fiber Converter
FTD1218S	Single-mode RS-422/485 to Fiber Converter with Surge
FTD1218I	Single-mode RS-422/485 to Fiber Converter with Isolation
FTC1218SI	Single-mode RS-422/485 to Fiber Converter with Surge & Isolation
FTD1218M	Multi-mode RS-422/485 to Fiber Converter
FTD1218MS	Multi-mode RS-422/485 to Fiber Converter with Surge
FTD1218MI	Multi -mode RS-422/485 to Fiber Converter with Isolation
FTD1218MM	Multi-mode RS-422/485 to Fiber Converter with Surge & Isolation

Optional Accessories

1. Power Adapter 12V / 1A
2. Wall Mount Kit
3. DIN-Rail Mount Kit
4. Rubber foot stub / Screw